Article
The UN6 water-cooled pneumatic butt welding machine is a relatively complexResistance butt welding machine, Xinxing Welding reminds everyone that you must operate in accordance with these safety operating procedures.
When starting, turn on the water source, air source, and finally the power supply.
After the welding machine is powered on, you should first check whether there is any leakage in the body shell, whether the cooling water flow and air inlet pressure are normal, whether there are any abnormalities in the mechanical components and electrical equipment, the electrode contacts should be kept smooth, and the oily welding slag on the electrodes should be removed before using the welding machine.
If there is any abnormality during inspection, you should immediately turn off the power, air and water sources and find a professional for repair.
During operation, the gas path and water cooling system should be kept clear, and the gas should be kept dry.
The drainage temperature of the welding machine outlet should not be too high.
The internal over-temperature protection of the welding machine is 90 degrees.
The welding machine will automatically stop working when the temperature exceeds the temperature.
It is recommended that the welding machine discharges water.
The temperature does not exceed 50 degrees, and the drainage volume can be adjusted appropriately according to the seasonal temperature.
When the welding machine is used after being out of service for a long time, it should be carefully checked and tested with power on for 30 minutes.
Welding operations and cooperation personnel must wear labor protection equipment as required.
Safety measures must be taken to prevent accidents such as electric shock, falling, fire, etc.
When welding and removing welding slag, the head should avoid the plane where the welding is located and the direction of the welding slag splash.
Wuxi Xinxing Welding Equipment Factory was established in 1993 and has focused on resistance welding machines for nearly 30 years.
Its products include: butt welding machines, pneumatic butt welding machines, flash butt welding machines, hydraulic butt welding machines, copper and aluminum pipe butt welding machines, automatic butt welding machines, spot welding machines, and pneumatic spot welding machines.
, medium frequency spot welding machine, energy storage spot welding machine, precision spot welding machine, automatic spot welding machine, projection welding machine, variable frequency projection welding machine, medium frequency projection welding machine, row welding machine, fully automatic welding production line, seam welding machine, medium frequency seam welding machine, resistance brazing machine and supporting printer, spark testing machine,High pressure testing machineThere are more than 300 types of products, pay-off machines, etc.
, with more than 5,000 long-term cooperative customers, and the quality is comparable to that of major imported brands.
Welcome to learn more and buy!